SSK Delta Design Engineering Pvt. Ltd.
SSK
DESIGN ENGG
XLogic PLC Overview
PLOT NO: 4158, FIRST FLOOR, T.N.H.B, AYAPAKKAM, CHENNAI - 600077, TAMILNADU, INDIA. CONTACT PH.NO: 9840292883; CLICK CONTACT TAB FOR MORE
We are the authorised distributer of XLogic PLCs and GSM Products in India. These PLCs are very suitable for the replacement of legacy single loop controller, relay based panel, timer based circuits and any complex requirements for small I/Os. As these PLCs are available at very low cost, it is very suitable/cheaper to replace the above said circuits/component at the same time it is always possible to re-write/change the logic anytime which is not possible/difficult with the relay/timer/single loop circuits. Upon request we can send the XLogic PLC price list.

There are two types of PLCs available in XLogic System.

1. XLogic PLC
2. XMessenger PLC

XLogic PLC:

The xLogic PLC includes economic and advanced models, incorporating a good mix of digital & analogue IO , Integrated High Speed inputs and PWM output, counters, timers,real time clock and time switch functions. Available in 120V/240VAC or 12V/24VDC versions;Easy to configure with drag and-drop function blocks using FREE xLogicSoft software.With HMI range offers 4-line detachable LCD display and keypad for modifying parameters or display and control whilst program is running.

Xmessenger PLC:

Incorporates a wide range of CPUs, expansions, various accessories and software, specially designed for GSM/ GPRS wireless systems being used for remote measurements, data logging, control, diagnostics and object via short text messages (SMS) or CLIP calls. Configurable messages sending from device with static (text) or dynamic (text) and measured values content are a convenient way of passing important information to the monitoring center, or directly tothe defined phone numbers. SMS messages sending or Call out can be triggered by change of binary input state, reaching alarm thresholds, marker state change, counters and clocks. In particular, x-Messenger shall possess industrial design, practical set of I/O resources& easy to use configuration software tools. Multiple optional analog signals (0..10V DC) (0…20mA) ,(PT100) inputs built-in the module , make it possible to have direct connection of sensors, which lowers the cost of building system. Hence, it can directly work with humidity sensors,water level sensor, pressure transducers, flow sensors, smoke, gas, motion, shock and noise detectors, etc.